ibe_isi_gb

ngwaahịa

Polyethylene dị elu DMD1158

nkowa nkenke:

Aha ngwaahịa:HDPE resin

Aha ọzọ:Resin polyethylene dị elu

Ọdịdị:Ọcha ntụ ntụ/Granule pụtara ìhè

akara ule- ihe nkiri, ịfụ-ịkpụzi, extrusion ịkpụzi, injection ịkpụzi, ọkpọkọ, waya & USB na isi ihe.

Koodu HS:39012000


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ngwaahịa resin polyethylene dị elu bụ granule ma ọ bụ ntụ ntụ, enweghị adịghị arụ ọrụ.

Thermoplastic elastomers nwere ihe anụ ahụ na arụ ọrụ nke rọba vulcanized na nhazi nhazi nke rọba dị nro.Ebe ọ bụ na rọba anaghịzi eme ka ọkụ na-ekpo ọkụ, enwere ike ịme ya ngwa ngwa ka ọ bụrụ ngwaahịa ikpeazụ site na iji ígwè ọrụ plastik dị mfe.Njirimara ya, usoro mmepụta ihe na-emepụta roba na-ebelata l / 4, na-azọpụta ike 25% ~ 40%, melite arụmọrụ 10 ~ 20 ugboro, enwere ike ịkpọ ụlọ ọrụ rọba ihe ọzọ na mgbanwe teknụzụ.Ụzọ abụọ bụ isi nke imepụta na nhazi thermoplastic elastomer bụ extrusion na ịkpụzi injection, nke a na-ejikarị eme ihe.A na-emepụta elastomer thermoplastic site n'ịkpụzi injection, nke na-adị ngwa ngwa ma dị oke ọnụ ahịa.Ụzọ ịkpụzi injection na akụrụngwa ejiri maka thermoplastics izugbe na-adabara thermoplastic elastomers.A pụkwara ịhazi elastomers thermoplastic site n'ịkpụ akpụ, ịkpụ ọkụ, na ịgbado ọkụ.

Ngwa

DMD1158 ntụ ntụ, butene copolymerization ngwaahịa, ihe pụrụ iche maka nnukwu arịa oghere, nwere ezigbo ike, iguzogide nrụgide gburugburu ebe obibi na ezigbo nhazi.

Ekwesịrị idowe ebe nchekwa nchekwa resin ikuku, kpọrọ nkụ, pụọ na ọkụ na ìhè anyanwụ.E kwesịghị ikpokọta ebe ikuku mepere emepe ruo ogologo oge.N'oge njem, a gaghị ekpughe ihe ndị dị n'ìhè siri ike ma ọ bụ oke mmiri ozuzo, a gaghịkwa ebu ya na ájá, ala, metal scrap, coal ma ọ bụ iko.A machibidoro iwu ibufe ihe na-egbu egbu, ihe na-emebi emebi na ihe na-ere ọkụ.

IBC RAW ihe onwunwe
3

HDPE Granules DMD1158

Ihe Nkeji Nkọwapụta
Njupụta g/cm3 0.950-0.955
Ọnụego mgbaze (MFR) g/10 nkeji 1.7-2.5
Ike Mmụba Nkwụsị MPa ≥24.0
Elongation na ezumike % ≥600

  • Nke gara aga:
  • Osote: