PVC nkwusioru resin maka imepụta ọkpọkọ PVC & akwa akwa
PVC nkwusioru resin maka imepụta ọkpọkọ PVC & akwa akwa,
PVC nkwusioru resin iji mepụta ọkpọkọ PVC na akwa akwa,
PVC ọkpọkọ (kewara n'ime PVC-U ọkpọkọ, PVC-M ọkpọkọ na PVC-O ọkpọkọ) siri ike polyvinyl chloride ọkpọkọ, mere nke PVC resin na stabilizer, mmanu na ndị ọzọ na-ekpo ọkụ na ịpị extrusion ịkpụzi, bụ nke mbụ na-mepụtara na etinye plastic. ọkpọkọ.
PVC-U ọkpọkọ nwere nguzogide corrosion siri ike, njikọ dị mfe, ọnụ ala dị ala na udidi siri ike, mana n'ihi nhụcha nke PVC-U monomer na ihe mgbakwunye, ọ dabara naanị maka usoro ọkọnọ mmiri ebe okpomọkụ ụgbọ njem anaghị agafe 45 Celsius C. A na-eji ọkpọkọ rọba maka ngwa na drainage, mmiri mkpofu, kemịkalụ, mmiri ọkụ na mmiri oyi, nri, mmiri mmiri dị ọcha, apịtị, gas, ikuku abịakọrọ na usoro agụụ.
Pvc-o ọkpọkọ, Chinese aha biaxial gbakwasara polyvinyl chloride, bụ ọhụrụ ụdị evolushọn nke PVC ọkpọkọ, site na pụrụ iche nghazi nhazi usoro rụpụta ọkpọkọ, PVC-U ọkpọkọ mepụtara extrusion usoro maka axial stretching na radial stretching, ya mere. na PVC ogologo yinye ụmụ irighiri ihe dị na ọkpọkọ na nhazi biaxial, A na-enweta ọkpọkọ PVC ọhụrụ nke nwere ike dị elu, ike siri ike, mmetụta dị elu na nkwụsị ike ọgwụgwụ.
Nkọwa ngwaahịa
PVC na-abịa n'ụdị isi abụọ: siri ike na mgbanwe.Enwere ike iji ụdị PVC siri ike na ọkpọkọ, ọnụ ụzọ na Windows.Enwere ike iji ya na karama, nkwakọ ngwaahịa ndị ọzọ na-abụghị nri, yana kaadị akụ ma ọ bụ otu.Enwere ike ịme ya ka ọ bụrụ ngwaahịa a rụchara dị nro, nke a na-eme ka ọ dịkwuo mfe site na mgbakwunye nke plasticizers, nke na-emekarị phthalates.N'ụdị a, enwere ike iji ya na ọkpọkọ dị nro, eriri USB, akpụkpọ anụ na-eṅomi, akara dị nro, ngwaahịa inflatable, na n'ọtụtụ ngwa kama rọba.
Enwere ike ime polyvinyl chloride site na ethylene, chlorine na catalyst site na mmeghachi omume nnọchi.N'ihi ọkụ ọkụ ya na nguzogide okpomọkụ, a na-eji PVC eme ihe n'ụdị ndụ niile na ngwaahịa dị iche iche: akpụkpọ anụ, akpụkpọ anụ anya, akpụkpọ ụkwụ, akpa aka, akpa, ihe ịchọ mma, ihe ịrịba ama na mpempe akwụkwọ, ihe ịchọ mma ụlọ, ngwá ụlọ, nghọta. ihe ịchọ mma, rollers, ọkpọkọ, ihe ụmụaka ji egwuri egwu (dịka Ịtali a ma ama "Rody" na-awụlikwa elu ịnyịnya), ihe ngosi ihe nkiri, ákwà mgbochi ọnụ ụzọ, ọnụ ụzọ na-agbagharị agbagharị, ihe enyemaka ahụike, uwe aka, ụfọdụ akwụkwọ nri, ụfọdụ ejiji, wdg.
Resin PVC SG5 emepụtara site na usoro nkwusioru dabara adaba maka imepụta ọkpọkọ PVC siri ike na profaịlụ.
Nkọwapụta
| Ihe | SG5 |
| Nkezi ogo nke polymerization | 980-1080 |
| K uru | 66-68 |
| Viscosity | 107-118 |
| Ihe nke mba ofesi | 16 max |
| Ihe na-agbanwe agbanwe,% | 30 max |
| Njupụta pụtara ìhè, g/ml | 0.48 nkeji |
| 0.25mm Ejidere Sieve,% | 1.0 kacha |
| 0.063mm Ejidere Sieve,% | 95 min |
| Nọmba nke ọka / 400cm2 | 10 max |
| Ntinye plastik nke 100g resin, g | Nkeji 25 |
| Ọkwa ọcha 160ºC 10min, % | 80 |
| Ọdịnaya CHLORE THYLENE fọdụrụnụ, mg/kg | 1 |
Ngwa
Pipe, efere siri ike transperent.Ihe nkiri na mpempe akwụkwọ, ihe ndekọ foto.PVC eriri, plastik na-afụ, ihe mkpuchi ọkụ eletrik:
1) Ihe eji arụ ọrụ: ọkpọkọ, mpempe akwụkwọ, windo na ọnụ ụzọ.
2) Nkwakọ ngwaahịa
3) Eletrọnịkị ihe: USB, waya, teepu, bolt
4) Ngwongwo: ihe eji achọ mma
5) Ndị ọzọ: Ihe ụgbọ ala, ngwa ahụike
6) Ụgbọ njem na nchekwa
4. ngwugwu:
Akpa akwụkwọ 25kg kraft nwere akpa PP ma ọ bụ akpa jambo 1000kg.
28 tọn / 40 GP
